search

CAMSHAFT PROCAM 4A-G(Z) 16V IN 306-11.00

parts # TA301C-TY01D
msrp $370.00
engine TOYOTA 4A-G(Z) 16V
model TOYOTA 92 LEVIN/TRUENO, TOYOTA 86 LEVIN/TRUENO, TOYOTA 101 LEVIN/TRUENO, TOYOTA AW11 MR2
main category HEAD RELATED
sub category CAMSHAFT
shipping size 19 x 6 x 4 inch / 48 x 15 x 10 cm
shipping weight 7 lbs / 4 kg
qty in stock 2
note Only 2 in Stock

Resources

Item Description

ENGINE4A-GE 16 VALVE
MODELAE86, AE92
IN/EXININEXINEXINEX
DURATION258274258290274306290
CAM LFIT8.158.158.15107.91110
PART NO.TA301C-TY01ATA301C-TY01BTA301E-TY01ATA301C-TY01CTA301E-TY01BTA301C-TY01DTA301E-TY01C
SET PART NO. TA301A-TY01ATA301A-TY01BTA301A-TY01C
REQUIRED
PARTS
VALVE
SPRING
PART NO.
OEMOEMUP Rated TypeUP Rated Type
VALVE
LIFTERS
PART NO.
OEMOEMInner ShimInner Shim
VALVE
SHIMS
PART NO.
OEMOEM  
CAMGEARS
PART NO.
 TA302A-TY01ATA302A-TY01ATA302A-TY01A

Optimized 'velocity' and 'acceleration'.

Designed for high power setups.

Optimizes engine performance.

Higher lift than other profiles of the duration.

Reduced stress/wear on the valve train.

valc_gluf.jpg

1⃣

The VALC profile allows the valves to open faster and for longer. This translates to faster lift and increased area under the 'lift curve' (see fig. ①) which in turn generates more power. (Greater area under the 'lift curve' = greater air intake)

CAM ACCELERATION CAM ACCELERATION
LOW

HIGH

LIFT LIFT
LOW

HIGH

AIR INTAKE AIR INTAKE
LOW

HIGH

2⃣

Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.

3⃣

With a conventional direct-acting valve train, the maximum lift is usually determined by the size/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. (see fig. ②)

Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge.

VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter) 

cam_lifter_01_s.jpg
High lift profile without taking lifter size/radius into account.






Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift/performance gains

a.jpg