search

CAMSHAFT PROCAM EJ207/257 DUAL AVCS EX 272-10.80

parts # TA301E-SB02D
msrp $440.00
engine SUBARU EJ25 DUAL AVCS
model SUBARU WRX, SUBARU WRX STI
main category HEAD RELATED
sub category CAMSHAFT
shipping size 28 x 4 x 4 inch / 71 x 10 x 10 cm
shipping weight 14 lbs / 7 kg
qty in stock 7
note In Stock Now!

Resources

Item Description

ENGINEEJ20/EJ25 DUAL AVCS
MODELWRX 2009-2014
IN/EXINEXINEX
DURATION262258272
CAM LFIT9.810.810.8
PART NO.TA301C-SB02CTA301E-SB02CTA301C-SB02DTA301E-SB02D
SET PART NO.TA301A-SB02CTA301A-SB02D
REQUIRED
PARTS
VALVE
SPRING
PART NO.
TA304A-SB01ATA304A-SB01A
VALVE
LIFTERS
PART NO.
OEMOEM
VALVE
SHIMS
PART NO.
  
CAMGEARS
PART NO.
OEMOEMOEMOEM

Optimized 'velocity' and 'acceleration'.

Designed for high power setups.

Optimizes engine performance.

Higher lift than other profiles of the duration.

Reduced stress/wear on the valve train.

valc_gluf.jpg

1⃣

The VALC profile allows the valves to open faster and for longer. This translates to faster lift and increased area under the 'lift curve' (see fig. ①) which in turn generates more power. (Greater area under the 'lift curve' = greater air intake)

CAM ACCELERATION CAM ACCELERATION
LOW

HIGH

LIFT LIFT
LOW

HIGH

AIR INTAKE AIR INTAKE
LOW

HIGH

2⃣

Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.

3⃣

With a conventional direct-acting valve train, the maximum lift is usually determined by the size/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. (see fig. ②)

Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge.

VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter) 

cam_lifter_01_s.jpg
High lift profile without taking lifter size/radius into account.






Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift/performance gains

a.jpg