search

OUTLET COMPONENT EXPREME EVO10 4B11

parts # TB6060-MT02A
msrp $590.00
engine MITSUBISHI 4B11
model MITSUBISHI EVO10
main category SUS EXHAUST
sub category OUTLET COMPONENT
shipping size 21 x 9 x 13 inch / 53 x 21 x 32 cm
shipping weight 15 lbs / 7 kg
qty in stock 23
note In Stock Now!

Resources

Item Description

KIT CONTENTS

    • OUTLET COMPONENT
    • FLANGE NUT M12 * P=1.25
    • GASKET (TURBO SIDE)
    • STICKER (EXPREME)
    • GASKET (CATALYZER)
    • BOLT SMOOTH PASTE
    • CLAMP BAND
    • INSTALLATION MANUAL
    • BLIND PLUG
    • STICKER (TOMEI)
    • COPPER WASHER
    • WARRANTY CARD
    • STUD BOLT M10-40 P=1.25 (THREAD 12/26)
    • TITAN EXHAUST BANDAGE
    • BANDAGE BAND

After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.

WIDE MOUTH

The smooth flowing design, without steps from the turbocharger. Manufactured with the lost wax process, combines both strength and beauty.

3 INCH PIPE

After numerous tests, the 3 inches (76.3mm) greatly increases both power and torque.

TORQUE & POWER

Wide mouth & 3 inch piping. Achieve large power & torque gains over OEM.

Direct bolt on that retains the original stock layout.

Lost Wax casting process for maximum durability, precision without welds.

Larger in size and diameter, smooth without any steps.

The larger curve design makes it possible for a much larger capacity.

Improved efficiency through with a more linear layout.

TOMEIOEM
MATERIALSUS304STEEL
PIPE
DIAMETER(Φ)
76.364.5
PIPE
LENGTH(mm)
1.51.5
FLANGE
LENGTH(mm)
13-1212-12
WEIGHT(kg)4.8
(With Accessories)
5.2

GOOD DESIGN FOR TOOLS

The wide mouth was designed to be easy to install with the general common work tools.

O2 SENSOR BOSS FOR AFR GAUGES

The mouting boss is an M18, which makes it easy to fit the AFR sensor. Comes with a blind plug to seal the hole when not in use.

FLEXIBLE PIPE DESIGN

Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.

PERFORMANCE

TEST MODEL

The Engine Dyno graph on the left shows the overall perforamnce increase throughout all RPM ranges to give the overall improved performance results. This was achived with extensive engine bench testing time from our R&D.

This is the results based on the Z33 (350Z) exhaust manifold (headers) + straight front pipes which brings out the overall higher performance throughout the entire RPM range.
test.jpg




STRIVING for PERFECTION

The Engine Dyno graph on the left shows the overall perforamnce increase throughout all RPM ranges to give the overall improved performance results. This was achived with extensive engine bench testing time from our R&D.


This is the results based on the Z33 (350Z) exhaust manifold (headers) + straight front pipes which brings out the overall higher performance throughout the entire RPM range.






ROAD TEST

All data is logged and tested for accruate testing and attention to detail on the products efficiency for finding the best results.



LIGHTER

Case Example: Lancer Evolution where the exhaust is situated at the front of the car, every bit of weight reduction there helps a lot in improving the handling of the cars cornering characteristics. Every bit helps for you to gain that extra edge over your rivals.



QUALITY

LOST WAX PROCESSED

EXPREME is manufactured from various manufacturing methods combined especially for mass production high quantity. But the flange, bend sections & gathering section are finished off with lost wax processing for superior quality.

The benefits of "Lost Wax" Processing

* Stable High Quality

* High Intensity

* Durable

(Smooth inner walls & killer looks)



Lost wax processed on the gathering section and flange




SUS304 MATERIAL

The EXPREME products are made from stainless steel SUS304 material. It is light weight, has best resistance to corrosion, superior in heat resistance, better exhaust race harmonics, helps increase your cars value.



QUALITY CONTROL

All EXPREME products are screened with strict quality control. Even mass productions our QA levels are high to ensure the best possible product that will be worthy of the TOMEI brand name and guaranteed to meet & exceed all users expectations.

* Main Inspection Points

* Each Section Size

* Flange Quality

* No signs of burr or flash

* No signs of scratches or leaks

* Installation tested

* Weight is checked

* There are more inspection points but each product has different extra points addressed.

  • Parts No.PB6150-BDB02
  • Weight2 lbs
  • MSRP$1.00
  • Dimension6 x 6 x 6 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock8459
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-BDB02
  • MSRP$1.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight2 lbs
  • Dimension6 x 6 x 6 inch
  • Stock8459
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-BDG01
  • WeightN/A
  • MSRP$22.00
  • DimensionN/A
  • Sub CategoryEXHAUST REPAIR PART
  • Stock157
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-BDG01
  • MSRP$22.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • WeightN/A
  • DimensionN/A
  • Stock157
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-BSP01
  • Weight1 lbs
  • MSRP$2.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock47
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-BSP01
  • MSRP$2.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock47
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-CUW02
  • Weight1 lbs
  • MSRP$2.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock22
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-CUW02
  • MSRP$2.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock22
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-FGK19
  • Weight1 lbs
  • MSRP$30.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock4
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-FGK19
  • MSRP$30.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock4
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-FGK22
  • Weight1 lbs
  • MSRP$6.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock21
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-FGK22
  • MSRP$6.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock21
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-FNT08
  • Weight1 lbs
  • MSRP$1.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock1
  • EngineN/A
  • NoteOnly 1 in Stock
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-FNT08
  • MSRP$1.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock1
  • NoteOnly 1 in Stock
  • Available Repair PartsNo

  • Parts No.PB6150-MCB07
  • Weight1 lbs
  • MSRP$15.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock107
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-MCB07
  • MSRP$15.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock107
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-OSB02
  • Weight1 lbs
  • MSRP$6.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock16
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-OSB02
  • MSRP$6.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock16
  • NoteIn Stock Now!
  • Available Repair PartsNo

  • Parts No.PB6150-SBT07
  • Weight1 lbs
  • MSRP$3.00
  • Dimension9 x 7 x 1 inch
  • Sub CategoryEXHAUST REPAIR PART
  • Stock5
  • EngineN/A
  • NoteIn Stock Now!
  • ModelN/A
  • Available Repair PartsNo
  • Parts No.PB6150-SBT07
  • MSRP$3.00
  • Sub CategoryEXHAUST REPAIR PART
  • EngineN/A
  • ModelN/A
  • Weight1 lbs
  • Dimension9 x 7 x 1 inch
  • Stock5
  • NoteIn Stock Now!
  • Available Repair PartsNo

Related Items from Same SubCategory